Back
back to all categoriesOrion controller for ST801 and ST 802
The Orion System Controller is the latest release of the central control unit for the EFFEKTA® DC power systems. The user-friendly display provides the main information about the state of the power supply system. New features such as the „efficiency mode” can help to reduce operating costs of the systems.
In this case are unused modules, for example at lower load shut down in order to increase the efficiency of the system. An integrated web server provides a user-friendly interface with a standard Web browser for both local and remote communication. The communication with the connected components via CAN bus.
Downloads
Characteristics
- Pluggable
- Replacement during operation
- Programmable relay contacts
- Easy system expansion
- Digital system bus
- Sophisticated battery management
- Remote monitoring via modem or LAN
- Integrated web server
- Energy saving features
- Monitoring of additional equipment
- Advanced system control / monitoring
- 24 months warranty
Specifications
| Orion | ||
|---|---|---|
| Input | Input voltage range | 18 – 75 VDC |
| Current | 0,75 ADC max. | |
| Input protection | Fuse 2A, extern | |
| User interface | Status display | LED «ok», LED «alarm» |
| Features | Rectifier interface | Digital, CAN-based |
| Number of rectifiers | Bis 128 | |
| Digital Inputs | Bis 225 | |
| Relay outputs | Bis 97 | |
| Temperature measurements | Bis 96 | |
| Voltage, current | Bis 96 | |
| Local monitoring / remote monitoring | LAN/RS232/WEB Browser | |
| Remote alarm | Relay contacts / SNMP | |
| SNMP-Management | Standard SNMP Manager | |
| Funktions | Temperature compensated float voltage | |
| Battery-center measurement | ||
| Battery pack voltage, up to 256 | ||
| Battery charging current limit | ||
| Quick charge, Equalizing charging | ||
| Battery test, optionally with capacity measurement | ||
| Partial load and battery shutdown up to 96 | ||
| Battery deep discharge protection | ||
| Individual rectifier control | ||
| Energy saving mode, cyclic rectifier operation | ||
| Sequential rectifier startup | ||
| PLC functionality | ||
| Event generator, 200 log entries | ||
| Environmental conditions | Temperature | -35 … +60°C / -31 … +140°F |
| Relative humidity | 0-90 % RH @ 0- 40°C (non condensing) | |
| General | Safety and Standards | EN 60950, class I, UL 60950, CAN / CSA – C22.2 EN 55022, class B EN 300 386-2 |
| Cooling | Convection | |
| Iinstallation direction | all | |
| Protection class | IP 20 | |