Line-Interactive MTD-RT series
The MTD RT and MTD XL RT is EFFEKTA®‘s high-end line-interactive version of the MTD series. The back-up time of the XL-models can be extended by additional external battery packs in a unified design.
Its RackTower housing and the rotating LCD display allow both the use as a tower unit as well as installation in 19” cabinets.
Downloads
Characteristics
- UPS-classification VI-SS-311 (IEC 62040-3)
- Line-interactive technology
- Excellent power factor of 0.9
- High efficiency (> 97%)
- „RackTower“ can be used both as a standalone unit, as well as a 19“ rack mount unit
- XL-models expandable by external battery packs
- Huge input voltage range
- User-friendly LCD display with backlight
- Programmable outputs
- Hot swappable batteries
- Sine wave output
- Automatic frequency detection
- Equiped with RS-232 and USB port as standard
- Slot for optional adapters: relay-card or SNMP
- Management software
- 24 months‘ warranty
Specifications
| MTD | 1000 RT | 1500 RT | 2000 RT | 3000 RT | |
|---|---|---|---|---|---|
| Power | Power in VA | 1000 | 1500 | 2000 | 3000 |
| Power in W | 900 | 1350 | 1800 | 2700 | |
| Autonomy time 100% / 50% load (cos. phi 0.7) | With internal batteries in minutes | 7 / 15 | 5 / 11 | 7 / 15 | 5 / 11 |
| Internal batteries + 1 x battery pack | |||||
| Longer autonomy times on request (XL) | |||||
| Technology | Line-Interactive | VI-SS-311 in accordance with IEC 62040-3 | |||
| Phase | Input / Output | 1-phase / 1-phase | |||
| Input | Nominal voltage | 220/230/240 VAC | |||
| Input voltage range | 161-276 VAC | ||||
| Input frequency range | 50/60 Hz (Auto-Sensing) | ||||
| Output | Output voltage | 220/230/240 VAC | |||
| Voltage Regulation | ±5% | ||||
| Frequency Range | 50 Hz or 60 Hz ± 1 Hz | ||||
| Transfer time | 2-6 ms typical / 10 ms max. | ||||
| Overload Capability (Line Mode) | < 110% for 3 min. | ||||
| Overload Capability (Battery Mode) | < 110% for 30 sec. | ||||
| Voltage form | sine wave | ||||
| Efficiency | Utility mode | max. 97% | |||
| Battery | Type | Maintenance free lead-acid battery | |||
| Life time | 5 years, optional 10 years | ||||
| Charging current (max) | 1,5A standard / 4,5A XL version / ab. 2 battery pack 7A | ||||
| Hot-Swappable | Yes | ||||
| Recharging time | ca. 6 h / 90% capacity | ||||
| Communication | Interface | RS232, USB, EPO | |||
| Slot for further communication cards | Optional relay contacts or SNMP card | ||||
| Display | LC-Display | ||||
| Dimensions / Weight | Dimensions (H x W x D in mm) | 86.5 (2HE) x 438 (19“) x 430 | 86.5 (2HE) x 438 (19“) x 600 | ||
| Dimensions of battery extension (HxBxT in mm) optional | 86.5 (2HE) x 438 (19“) x 430 | 86.5 (2HE) x 438 (19“) x 600 | |||
| Weight UPS (Standard / XL) | 16 kg / 12 kg | 29,5 / 18,6 | |||
| Weight battery pack | depending on the quantity of batteries | ||||
| Protection | IP 20 (optionally higher protection class possible) | ||||
| Terminals | Input | IEC (10 A) | IEC (16 A) | ||
| Output | 8 x IEC C13 (10 A) | 8 x IEC C13 (10 A) 1 x IEC C19 (16 A) | |||
| Environmental conditions | Temperature | 0°C – 40°C, 20°C recommended | |||
| Humidity | 0-90 % RH @ 0- 40°C (non condensing) | ||||
| Acoustic Noise | < 52 dB | ||||
| Safety / Enclosure | Safety | EN 62040-1 | |||
| EMC | EN 62040-2 class C2 | ||||
| Certifications | CE | ||||
Options for extended communication and maximum availability:
- SNMP/web or relay card for monitoring in network environments
- Additional battery modules to provide an uninterruptible power supply for up to several hours
- External manual bypass for planned UPS maintenance work or replacement of the UPS unit without shutting it down