Back
back to all categoriesATS 16 A / 30 A
The ATS-16 is a transfer switch for 1-phase electricity networks and switches between two power sources
(manually or automatically). So it ensures a redundant power supply connected equipment
up to 16A.
EFFEKTA® recommends to use a VFI UPS system as power source.
Open in the catalogueDownloads
Characteristics
- Break-Before-Make-Switching
- Protection against backfeed (EN62310-1)
- Overload and short circuit protection
- Redundant power supply (source 1 and 2)
- AC source detection (voltage and current detection)
- Output detection (current detection)
- LED display
- 24 months warranty
Specifications
| ATS | 16 HV | 16 K | 32 K | |
|---|---|---|---|---|
| Power | Power in A | 16 | 16 | 30 |
| Phase | Input / Output | 1-phase / 1-phase | ||
| Input | Rated Voltage configurable | 230VAC | ||
| Input voltage range | 160-290 VAC | 190 – 275 VAC | ||
| Voltage Regulation | ± 12 % ~ ± 20 % | ± 5 % | ||
| 50/60 Hz ± 6Hz | ||||
| Output | Output voltage nom. | 230 VAC | ||
| Voltage Regulation | ± 12% ~ ± 20% | ± 5% | ||
| Frequency Range | 50/60 Hz ± 6Hz | |||
| Transfer time | 15 msec. | 7.6 – 27 msek. (load-dependent) | ||
| Communication | Interface | RS232, REPO | keine | |
| Display | LED | |||
| Dimensions / Weight | Dimensions UPS (H x W x D in mm) | 44 x 430 x 430 | 44 x 430 x 285 | |
| Weight UPS | 4.5 kg | 3.5 kg | 3.5 kg | |
| Protection | IP 20 | |||
| Terminals | Input | 2 x IEC 16A | Fixed connection | |
| Output | 6 x IEC 10A, 1 x IEC 16A | 1 x IEC 10 A, 1 x IEC 16A | Fixed connection, 1 x IEC 10A | |
| Environmental conditions | Temperature | 0°C – 40°C | ||
| Humidity | 0-90 % RH @ 0- 40°C (non condensing) | |||
| Acoustic Noise | Almost noiseless < 40 dB | |||
| Safety / Enclosure | Safety | EN 62040-1 | ||
| EMC | EN 62040-2 | |||
| Certifications | CE | |||