Back
back to all categoriesAC large UPS TRITON M2, 60-80 kVA
With the TRITON EFFEKTA® offers a modern, modular design, online double conversion UPS with 3-phase input & output.
The system is operated with two 30 or 40kVA power modules. Further up to 4 of these systems can be operated in parallel.
The power modules allow easy maintenance and replacement and therefore low service costs (very low MTTR value).
Open in the catalogueDownloads
Characteristics
- UPS classification VFI-SS-111 (IEC 62040-3)
- Online double conversion with sinusoidal output
- Easy maintenance through modular design
- Large input voltage range
- High input power factor up to 1 (0.99)
- High efficiency (up to 95%)
- Switchable to ECO mode (> 98%, line-interactive)
- High output power factor (0,9)
- EPO (remote shutdown)
- Temperature-controlled fan
- 3-step gentle battery charging method
- Extensive communication interfaces
- Management software for all common OS
- 24 months warranty
Specifications
| TRITON M2 | 60 kVA | 80 kVA | |
|---|---|---|---|
| Power | Power in VA | 60000 | 80000 |
| Power in W | 54000 | 72000 | |
| Autonomy time 100% / 50% load (cos. phi 0.7) | With internal batteries in minutes | 7 / 17 | 4 / 10 |
| Longer autonomy times on request | |||
| Technology | Online double conversion | VFI-SS-111 in accordance with IEC 62040-3 | |
| Phase | Input / Output | 3-phase / 3-phase | |
| Input | Nominal voltage | 380/400/415 VAC | |
| Input voltage range | 208-478 VAC | ||
| Input frequency range | 50/60 Hz (Auto-Sensing) | ||
| Circuit feedback THDI | < 3% | ||
| Output | Output voltage | 380/400/415 VAC | |
| Voltage Regulation | ±2% | ||
| Power factor | 0.9 | ||
| Frequency Range | 50 Hz or 60 Hz ± 1 Hz | ||
| Transfer time | none | ||
| Overload Capability (Line Mode) | < 125%: 10 min. / < 150%: 1 min. | ||
| Voltage form | sine wave | ||
| Efficiency | Normal mode / ECO mode | max. 95% / 98% | |
| Battery | Type | Maintenance free lead-acid battery | |
| Life time | 5 years, optional 10 years | ||
| Charging current (max) | 10 A | ||
| Recharging time | 8 h, dependent on accumulator capacity | ||
| Communication | Interface | USB, RS232, RS485, EPO, REPO dry contact, Temp.sensor | |
| Communication cards | Optional relay contacts or SNMP card | ||
| Slot for communication cards | 2 | ||
| Display | multi language LC-Display | ||
| Parallel switching | Max. 4 systems for redundancy or to boost performance | ||
| Dimensions / Weight | Dimensions UPS (H x W x D in mm) | 1200 x 600 x 780 | |
| Weight UPS (without accumulators) | 189 kg | 195 kg | |
| Dimensions of battery extension (H x W x D in mm) | 1200 x 600 x 780 | ||
| Weight battery cabinet with standard configuration | 606 kg | 881 kg | |
| Protection | IP 20 (optionally higher protection class possible) | ||
| Terminals | Input | Fixed connection on terminals | |
| Output | Fixed connection on terminals | ||
| Environmental conditions | Temperature | 0°C – 40°C, 20°C recommended | |
| Humidity | 0-90 % RH @ 0- 40°C (non condensing) | ||
| Acoustic Noise | < 55 dB | ||
| Safety / Enclosure | Safety | EN 62040-1 | |
| EMC | EN 62040-2 class C3 | ||
| Certifications | CE | ||
Options for extended communication and maximum availability:
- SNMP/web or relay card for monitoring in network environments
- Additional battery modules to provide an uninterruptible power supply for up to several hours
- External manual bypass for planned UPS maintenance work or replacement of the UPS unit without shutting it down
- Extended warranty arrangements
- Customer-oriented individual service and maintenance contracts