Atrás
volver a todas las categoríasUPS TRIAS RM 31_6/10 kVA
The new TRIAS RM UPS system from EFFEKTA® is one of the few 19“ systems with 3-phase input and 1-phase output in 19“ design.
With 6 kVA or 10 kVA output power at power factor 1 allows a setup of a highly available UPS system in 19“ cabinets. By parallel connection up to 4 systems can be combined to achieve n+x redundancy.
The TRIAS RM is thus an ideal solution for servers, banks, industrial/IT equipment, communication systems and other network devices that require comprehensive protection.
Descargas
Características
- UPS classification VFI-SS-111 according to IEC 62040-3
- Online double converter with sine wave output switchable to ECO mode
- Service-friendly battery exchange
- UPS software for all common operating systems
- Integrated remote emergency stop contact (REPO)
- 24 months warranty
Característica especial
- 3-phase input
- Unbeatable price advantage in this power class
- Excellent power factor of 1.0
- Mains feedback THDi <3%
- Automatic battery test adjustable via display
- Parallel redundant n+x operation possible
- Multilingual 2.4“ LC colour touch display
Especificaciones
| Model TRIAS RM | 6 kVA | 10 kVA | |
|---|---|---|---|
| Power | Nominal power in VA/W | 6000 | 10000 |
| Autonomy time | Standard configuration in min at 100%/50% load | 8 / 20 | 10 / 25 |
| Longer autonomy times on request | on request | ||
| Technology | On-line double converter | VFI-SS-111 according to IEC 62040-3 | |
| Phase | Input / Output | 1-phase/1-phase or 3-phase/1phase | |
| Input | Nominal voltage configurable | 380/400/415VAC or 220/230/240VAC | |
| Input voltage range | 208~478VAC or 120~276VAC | ||
| Input frequency range | 40-70Hz (autodetect) | ||
| Distortion (THDi) | ≤3% (100% non-linear load) | ||
| Output | Output voltage | 220/230/240 VAC | |
| Power factor | 1.0 | ||
| Voltage regulation | ±1 % | ||
| Frequency range | Mains operation: ±1%, ±2%, ±4%, ±5%, ±10% of nominal frequency (optional) Battery operation: 50 Hz / 60 Hz ± 0.2HzBatteriebetrieb: 50 Hz / 60 Hz ± 0,2 Hz | ||
| Transfer time | 0 ms | ||
| Overload Capability (Line Mode) | ≤110%: for 60 min, ≤125%: for 10 min, ≤150%: for 1 min, ≥150% immediate switchover to the bypass. | ||
| Overload Capability (Battery Mode) | ≤110%: for 10 min, ≤125%: for 1 min, ≤150%: for 1 sec, ≥150% immediate switch-off of the UPS. | ||
| Voltage form | Sine wave | ||
| Crest-Factor | 3:1 | ||
| THD | ≤2% @ linear load ≤5% @ non-linear load | ||
| Efficiency | Normal Mode | max. 93.5% | |
| Battery | Type | maintenance-free sealed lead fleece batteries | |
| Expected service life | 5 years (optional 10 years) | ||
| DC rated voltage | 192-240VDC adjustable, Standard 240VDC | ||
| Max. charging current standard | max. 12A | max. 14A | |
| Communication | Interfaces | RS232, RS485, Parallel, REPO, MAINTAIN- AUXSWS port | |
| Slots for communication cards | 1 x for Relays- or SNMP-card | ||
| Display | LCD-Display and LEDs | ||
| Dimensions / weight | Dimensions UPS (HxWxD in mm) | 131 (3HE) x 443 x 675 | |
| Weight UPS in kg | 27 | 28 | |
| Dimensions (HxWxD mm) | 131 (3HE) x 443 x 720 | ||
| Weight battery pack incl. batt. in kg | 80 | ||
| Dim. connection box (HxWxD in mm) | 131 (3HE) x 443 x 655 | ||
| Weight connection box in kg | 12 | ||
| Terminals UPS / connection box | Protection | IP20 | |
| Connections Battery | Input | Fixed connection on terminals | |
| Environmental conditions | Output | Fixed connection on terminals | |
| Protection / Standards | Battery pack | Battery cable with plug from / to UPS | |
| Temperature | 0°C – 40°C, 20°C recommended | ||
| Humidity | 0-95 % RH (non-condensing) | ||
| Safety | EN 62040-1 | ||
| EMC | EN 62040-2 class C3 | ||
| Standards | CE | ||
Options for extended communication and highest availability:
- SNMP-/Web or relay card for monitoring in network environment
- Additional battery cabinets to increase the bridging time to several hours
- Special designs available for industrial applications (connections / special housings, etc.)