
Multifunction inverter AX M2 H
The devices in the AX M2 H series with integrated MPPT solar charge controller are 48V / 5000W multifunction inverters / PV-chargers with the combined functions of an inverter as well as a solar and battery charging device.
The AX M2 H version is designed for particularly high PV voltages of up to 500 V.
These inverters are suitable for standalone operation independent of mains supply via PV modules but can also be operated with electrical power from accumulators, generators or the public power supply grid.
If insufficient power is being supplied from the PV modules, the device automatically tops up the power level with battery current or, if the batteries are discharged completely, it switches over to the mains power grid. A network of three AX units can be configured for 3-phase operation.
Datenblatt (PDF, 188.40 KB)
Zusätzliche Informationen
Downloads
Besonderheiten
- Battery equalizing
- Compatible with BMS communication from various lithium battery manufacturers such as Pylontech
- Installed MPPT solar charge controller for maximum performance from PV modules
- Integrated neutral-point emulation (VDE AR-E 2510-2)
- Integrated Wi-Fi for mobile monitoring (app is available)
- Intelligent fan control
- Power factor 1
- Removable LCD control module with multiple communication options
- Selectable high power charging current
- Very high PV input voltages over a wide voltage range (120 ~ 430 VDC)
Eigenschaften
- 24 months‘ warranty
- 3-phase operation is possible
- 48VDC Battery voltage
- 5000W nominal load
- Automatic reboot when mains power is restored
- Battery voltage thresholds can be adjusted individually
- Can be configured via LCD display or PC software
- Cold start function
- Island operation possible
- Parallel operation by up to 9 inverters
- Protection against excessive loads and temperatures as well as short circuits
- PV inverter without mains power supply
- PV- / Battery charger with 3-stage charge
- Several power sources
- Sine wave output
Technische Details
Model | AX M2 H, 5kVA, 48V | |
---|---|---|
Power | Power in VA / W | 5000VA / 5000W |
AC input | AC input voltage | 230VAC |
AC input voltage range | 110-280VAC | |
AC input frequency | 50Hz/60Hz (automatic detection) | |
Power factor | ≧ 0.98 @ nominal voltage (100% load) | |
Output | AC Output voltage | 230VAC ± 5% |
Output frequency | 46~54Hz or 56~64Hz (normal mode) 50Hz ± 0.1Hz or 60Hz ± 0.1Hz (battery mode) |
|
Transfer time | 0ms (AC > battery mode) 4ms (Inverter > Bypass) |
|
Wave form | Sine wave | |
Max. efficiency | 93% @ normal mode, 92% @ battery mode | |
Battery | Battery voltage | 48VDC |
Charging voltage | Float charging 54 VDC Boost charge 58.4 VDC (battery dependent) |
|
Overload protection | 66VDC | |
Solar charger / AC charger | Max. PV power | 6000W |
Type | MPPT | |
Max. PV charging current | 30A | |
Max. AC charging current (adjustable) | 100A | |
Max. charging current (adjustable) | 100A | |
Effective operating range UOP | 120 ~ 430VDC | |
Max. input voltage UOCV | 500VDC | |
Communication | RS232, DRY CONTACT, WI-FI, RS485, CAN, USB OTG | |
General data | Size (HxWxD) in mm | 480 x 310 x 140 |
Weight (in kg) | 12 | |
Humidity | 5% - 95% non-condensing | |
Operating temperature | 0°C - 55°C | |
Storage temperature | -15°C - 60°C | |
Protection | IP20 | |
Regulations / standards | Safety | EN 61000-6-4: 2007+A1: 2011; EN 61000-6-2: 2005+AC: 2005 |
EMC | EN 62109-1:2010, EN 62109-2:2011 | |
Certifications | CE |