Multifunction inverter AX M2
The devices in the AX M2 series with integrated MPPT solar charge controller are 3000W / 5000W multifunction inverters / PVchargers with the combined functions of an inverter as well as a solar and battery charging device. These inverters are suitable for standalone operation in-dependent of mains supply via PV modules but can also be operated with electrical power from accumulators, generators or the public power supply grid.
If insuffi cient power is being supplied from the PV modu-les, the device automatically tops up the power level with battery current or, if the batteries are discharged comple-tely, it switches over to the mains power grid. A network of three AX units can be confi gured for 3-phase operation.
Datenblatt (PDF, 1 MB)
Zusätzliche Informationen
Downloads
Besonderheiten
- Battery equalizing
- Compatible with BMS communication from varous lithium battery manufacturers such as Pylontech
- Installed MPPT solar charge controller for
- Integrated neutral-point emulation (VDE AR-E 2510-2)
- Integrated Wi-Fi for mobile monitoring (app is available)
- Intelligent fan control
- maximum performance from PV modules
- Power factor 1
- Removable LCD control module with multiple communication options
Eigenschaften
- 24 months‘ warranty
- 24, 48VDC Battery voltage
- 3-phase operation is possible
- 3000, 5000W nominal load
- Automatic reboot when mains power is restored
- Battery voltage thresholds can be adjusted individually
- Can be configured via LCD display or PC software
- Cold start function
- Island operation possible
- Parallel operation by up to 9 inverters
- Protection against excessive loads an temperatures as well as short circuits
- PV inverter without mains power supply
- PV- / Battery charger with 3-stage charge
- Several power sources
- Sine wave output
Technische Details
| AX-M2 | AX M2 3 kVA, 24V | AX M2 5 kVA, 48V |
|
|---|---|---|---|
| Power | Power in VA / W | 3000 VA / 3000 W | 5000 VA / 5000 W |
| AC input voltage | 230 VAC | ||
| AC input | AC input voltage range | 110-280 VAC | |
| AC input frequency | 50Hz/60Hz (automatic detection) | ||
| Power factor | ≧ 0.98 @ nominal voltage (100% load) | ||
| Output | AC Output voltage | 230 VAC ± 5 % | |
| Peak performance (5 seconds) | 6000 VA | 10000 VA | |
| Output frequency | 46~54Hz or 56~64Hz (normal mode) / 50Hz ± 0.1Hz or 60Hz ± 0.1Hz (battery mode) | ||
| Transfer time | 0ms (AC > battery mode) / 4ms (Inverter > Bypass) | ||
| Wave form | Sine wave | ||
| Max. efficiency | 93% @ normal mode, 90% @ battery mode | ||
| Battery | Battery voltage | 24 VDC | 48 VDC |
| Charging voltage max. | 29.2 VDC | 58.4 VDC | |
| Overload protection | 34 VDC | 66 VDC | |
| Solar charger / AC charger | Max. PV power | 1500 W | 4000 W |
| Type | MPPT | ||
| Max. PV charging current | 60 A | 80 A | |
| Max. AC charging current (adjustable) | 60 A | 60 A |
|
| Max. charging current (adjustable) | 120 A | 140 A |
|
| Effective operating range UOP | 30 ~ 115 VDC | 60 ~ 115 VDC | |
| Max. input voltage UOCV | 145 VDC | ||
| Communication | RS232, DRY CONTACT, WI-FI, RS485, CAN, USB OTG | ||
| General data | Size (HxWxD) in mm | 525 x 303 x 140 | |
| Weight (in kg) | 13 | 13.5 | |
| Humidity | 5% - 95% non condensing | ||
| Operating temperature | 0°C bis 55°C |
||
| Storage temperature | -15°C bis 60°C | ||
| Protection | IP20 | ||
| Regulations / standards | Safety | EN 61000-6-4: 2007+A1: 2011; EN 61000-6-2: 2005+AC: 2005 | |
| EMC | EN 62109-1:2010, EN 62109-2:2011 | ||
| Certifications | CE | ||