
Multifunction inverter AX M2
The devices in the AX M2 series with integrated MPPT solar charge controller are 3000W / 5000W multifunction inverters / PVchargers with the combined functions of an inverter as well as a solar and battery charging device. These inverters are suitable for standalone operation independent of mains supply via PV modules but can also be operated with electrical power from accumulators, generators or the public power supply grid. If insuffi cient power is being supplied from the PV modu-les, the device automatically tops up the power level with battery current or, if the batteries are discharged completely, it switches over to the mains power grid. A network of three AX units can be configured for 3-phase operation.
data sheet (PDF, 1 MB)
Additional Information
Downloads
Features
- Battery equalizing
- Compatible with BMS communication from various lithium battery manufacturers such as Pylontech
- Installed MPPT solar charge controller for
- Integrated neutral-point emulation (VDE AR-E 2510-2)
- Integrated Wi-Fi for mobile monitoring (app is available)
- Intelligent fan control
- maximum performance from PV modules
- Power factor 1
- Removable LCD control module with multiple communication options
Features
- 24 months' warranty
- 24, 48VDC Battery voltage
- 3-phase operation is possible
- 3000, 5000W nominal load
- Automatic reboot when mains power is restored
- Battery voltage thresholds can be adjusted individually
- Can be configured via LCD display or PC software
- Cold start function
- Island operation possible
- Parallel operation by up to 9 inverters
- Protection against excessive loads at temperatures as well as short circuits
- PV inverter without mains power supply
- PV / Battery charger with 3-stage charge
- Several power sources
- Sine wave output
Technical details
AX-M2 | AX M2 3 kVA, 24V | AX M2 5 kVA, 48V |
|
---|---|---|---|
Power | Power in VA / W | 3000VA / 3000W | 5000VA / 5000W |
AC input voltage | 230 VAC | ||
AC input | AC input voltage range | 110-280 VAC | |
AC input frequency | 50Hz/60Hz (automatic detection) | ||
power factor | ≧ 0.98 @ nominal voltage (100% load) | ||
output | AC Output voltage | 230VAC ± 5% | |
Peak performance (5 seconds) | 6000 VA | 10000 VA | |
Output frequency | 46~54Hz or 56~64Hz (normal mode) / 50Hz ± 0.1Hz or 60Hz ± 0.1Hz (battery mode) | ||
Transfer time | 0ms (AC > battery mode) / 4ms (Inverter > Bypass) | ||
Wave form | Sine wave | ||
Max. efficiency | 93% @ normal mode, 90% @ battery mode | ||
Battery | battery voltage | 24 VDC | 48 VDC |
Charging voltage max. | 29.2 VDC | 58.4 VDC | |
Overload protection | 34 VDC | 66 VDC | |
Solar charger / AC charger | Max. PV power | 1500 W | 4000 W |
Type | MPPT | ||
Max. PV charging current | 60 A | 80 A | |
Max. AC charging current (adjustable) | 60 A | 60 A |
|
Max. charging current (adjustable) | 120 A | 140 A |
|
Effective operating range UOP | 30 ~ 115 VDC | 60 ~ 115 VDC | |
Max. input voltage UOCV | 145 VDC | ||
Communication | RS232, DRY CONTACT, WI-FI, RS485, CAN, USB OTG | ||
General data | Size (HxWxD) in mm | 525 x 303 x 140 | |
Weight (in kg) | 13 | 13.5 | |
Humidity | 5% - 95% non condensing | ||
Operating temperature | 0 ° C to 55 ° C |
||
Storage temperature | -15 ° C to 60 ° C | ||
Protection | IP20 | ||
Regulations / standards | Safety | EN 61000-6-4: 2007+A1: 2011; EN 61000-6-2: 2005+AC: 2005 | |
EMC | EN 62109-1:2010, EN 62109-2:2011 | ||
Certifications | CE |