Line-Interactive MTX series
The MTX is a modern line-interactive UPS with a power factor of 0.9. It is available with power ratings of 800, 1100, 1500, 2000, and 3000 VA. All of the important information about the UPS can be viewed easily on the illuminated LC display. The sleek design of this quiet unit blends seamlessly into any office environment. To provide uninterruptible power for even longer periods, the capacity of MTX UPS units can be extended by adding external battery packs, available as optional extras.
data sheet (PDF, 772.70 KB)
Additional Information
Downloads
Features
- Early detection of faults
- Equipped with RS-232 and USB port as standard
- Excellent power factor of 0.9
- External battery packs can be added to all models
- Green Mode: UPS switches off in battery mode if no load is detected
- Intelligent battery test with a display
- Nearly noiseless (Suitable for office environments)
- Programmable UPS outputs
- Silent ECO mode: When batteries are fully charged, it switches the fan(s) off
- User-friendly illuminated LC display
Features
- Hot-swap
- 24 months' warranty
- Automatic frequency detection & self-test
- Automatic restart when mains power is restored
- Cold start function (starting in battery mode)
- High efficiency (> 97%)
- Line-Interactive technology
- Software management
- Sine wave output
- Slot for additional (relay contacts / SNMP card)
- UPS classification VI-SS-311 (IEC 62040-3)
Technical details
| MTX | 800 | 1100 | 1500 | 2000 | 3000 | |
|---|---|---|---|---|---|---|
| Power | Power in VA | 800 | 1100 | 1500 | 2000 | 3000 |
| Power in W | 720 | 990 | 1350 | 1800 | 2700 | |
| Autonomy time 100% / 50% load (cos. phi 0.7) | With internal batteries in minutes | 7 / 17 | 5 / 12 | 7 / 17 | 5 / 12 | 6 / 14 |
| Internal batteries + 1 x battery pack | 19 / 45 | 13 / 31 | 25 / 60 | 19 / 45 | 20 / 48 | |
| Longer autonomy times on request | ||||||
| Technology | Line-Interactive | VI-SS-311 in accordance with IEC 62040-3 | ||||
| Phase | Input / Output | 1-phase / 1-phase | ||||
| Input | Nominal voltage | 208/220/230/240 VAC | ||||
| Input voltage range | 170-280 VAC | |||||
| input frequency range | 50/60 Hz (auto-sensing) | |||||
| output | Output voltage | 208/220/230/240 VAC | ||||
| Voltage Regulation | ± 1,5% | |||||
| Frequency Range | 50 Hz or 60 Hz ± 1 Hz | |||||
| Transfer time | 2-6 ms typical / 10 ms max. | |||||
| Overload Capability (Line Mode) | < 120% 5 min. | |||||
| Overload Capability (Battery Mode) | < 110% 1 min. | |||||
| Voltage form | sine wave | |||||
| Efficiency | Utility mode | max 97% | ||||
| Battery | Type | Maintenance free lead acid battery | ||||
| life time | 5 years, optionally 10 years | |||||
| Charging current (max) | 1,5 A | #colspan# |
||||
| Hot swappable | Yes | |||||
| Recharging time | approx. 6 hours / 90% capacity | |||||
| Communication | Interface | RS232, USB, EPO | ||||
| Slot for further communication cards | Optional relay contacts or SNMP card | |||||
| Display | Multi language LC display | |||||
| Dimensions / Weight | Dimensions UPS (H x W x D in mm) | 240 x 145 x 376 | 240 x 145 x 484 | 338 x 190 x 427 | ||
| Dimensions battery pack (HxWxD in mm) optional | 240 x 145 x 397 | 338 x 190 x 416 | ||||
| Weight (UPS) | 12.7 kg | 13.1 kg | 20.4 kg | 21.6 kg | 30.5 kg | |
| Weight (battery pack) | depending on the quantity of batteries | |||||
| Protection | IP 20 (optionally higher protection class possible) | |||||
| terminals | Input | IEC (10 A) | IEC (16 A) | |||
| output | 8 x IEC C13 (10 A) | 8xIEC C13 10A 1xIEC C19 16A |
||||
| Environmental conditions | Temperature | 0°C – 40°C, 20°C recommended | ||||
| Humidity | 0-90% RH @ 0-40°C (non-condensing) | |||||
| Acoustic Noise | Normal mode: nearly noiseless <45 dB | |||||
| Safety / Enclosure | Safety | EN 62040-1 | ||||
| EMC | EN 62040-2 class C2 | |||||
| Certifications | CE | |||||