Controller Orion: Intelligent control for UPS battery management
The Orion System Controller is the latest version of the central control unit for the EFFEKTA® DC power supply systems. The user-friendly display provides the most important information about the status of the power supply system. New functions such as the "efficiency mode" help to reduce the operating costs of the systems. Modules that are not required, e.g. when the load is lower, are shut down to increase the efficiency of the system. An integrated web server offers a user-friendly interface with a standard browser for both local and remote communication.
data sheet (PDF, 666.47 KB)
Additional Information
Downloads
Features
- 24 months warranty
- Sophisticated battery management
- Exchange possible during ongoing operation of the system
- Digital System Bus
- Easy system expansion
- Energy saving features
- Remote monitoring via modem or LAN
- Freely programmable relay contacts
- Advanced plant control/monitoring
- Integrated WEB Server
- Pluggable
- monitoring of additional devices
Technical details
| Orion | ||
|---|---|---|
| Input | Input voltage range | 18 - 75 VDC |
| Input current | 0,75 ADC max. | |
| entrance protection | 2A fuse, external | |
| Benutzerschnittstelle | status indicator | LED «ok», LED «alarm» |
| Features | rectifier interface | Digital, CAN-based |
| number of rectifiers | Until 128 | |
| digital inputs | Until 225 | |
| Relay outputs | Until 97 | |
| temperature measurements | Until 96 | |
| voltage, current | Until 96 | |
| local / remote monitoring | LAN/RS232/WEB browser | |
| remote alarm | relay contacts / SNMP | |
| SNMP management | Standard SNMP Manager | |
| Features | Temperature-compensated floating charge voltage | |
| battery center point measurement | ||
| battery block voltage (up to 256) | ||
| battery charging current limitation | ||
| fast charging, equalizing charging | ||
| battery test (optionally with capacity measurement) | ||
| Partial load and battery shutdown (up to 96) | ||
| Battery - deep discharge protection, mains fault detection | ||
| Individual rectifier control | ||
| Energy saving mode, cyclic rectifier mode | ||
| Sequential rectifier start | ||
| PLC functionality | ||
| event generator, 200 log entries | ||
| Environmental conditions | Temperature | -35… + 60 ° C |
| humidity | 0-90 % RH @ 0- 40°C (non-condensing) | |
| Safety and Standards | EN 60950 Class I, UL 60950, CAN / CSA - C22.2 EN 55022, Class B IN 300 386-2 |
|
| Cooling | convection | |
| Installation direction | All | |
| Protection class | IP 20 | |